Who knows the structural material composition of the chargin

Who knows the structural material composition of the charging tower? More specific?

 

 

 

Because the material tower has to be used for a long time, placed in the open environment, and also bears 20-30 tons of feed weight, the material must be resistant to high position, low temperature is easier to guarantee the quality of feed, and the material tower must withstand the hot and high temperature weather, wind and rain for a long time. The material tower must be very good in corrosion resistance, oxidation resistance, hard and resilient to withstand the weight of 20-30 tons. These conditions absolutely make the material of the material tower better, but also have these characteristics.

 

 

 

1. Wall plate of material Tower: it is made of steel with tension up to 55000, which has been electroplated and coated to increase its strength and service life, and corrugated steel plate can ensure accurate and consistent fit during installation; the weight and thickness of galvanized layer have strict requirements, which meet the requirements of field use, with novel style and corrosion resistance, external main material line and complete supporting.

 

 

 

2. Movable bin cover system: the top adopts the movable bin cover system, which can open, close and block the bin on the ground. The limit bolt is used to ensure that the movable cover can be opened freely within 180 degrees.

 

 

 

3. Bin top edge: the bin top edge will have different design according to the actual situation. The edge at the bottom of the material tower formed by curling will keep the rainwater away from the funnel and the lower blanking pipe area, which can provide all-weather protection without impact.

 

 

 

4. Top of 40 degree material Tower: the top of 40 degree material tower provides greater strength and capacity.

 

 

 

5. Material tower side ladder: each silo can be equipped with a solid ladder. Each ladder body is molded with a whole piece of galvanized steel plate, which has the advantages of high strength, good stability, simple and quick installation. Small concave holes are punched on ladder rungs to prevent slipping. Bonchi chicken automatic feeding equipment

 

 

 

6. Panel: the optional funnel panel allows for the complete and convenient inspection and cleaning of customers in the future. Panels can be easily disassembled and assembled in a short time. A sealing gasket protects the chamber from mechanical damage. Panels may be suitable for all existing towers.

 

 

 

7. Hopper of feeding Tower: the hopper at the bottom of the feeding tower can be selected according to the inclination angle: 45 ° for dry feed conveying; 60 ° for smooth grain conveying;

 

 

 

The manufacturer of the material tower generally provides the service of repairing and replacing the parts of the material tower. If there is no such service manufacturer, it will cost a lot of money to contact these services again.